fujitsu plasma 42 manual

This display (P55XHA40) is for use only with Fujitsu General Limited's option (P-WB6300, P-CT6300, P-TT4202). The fifth input signal will replace the adjustment value of the first input signal.The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced.To return the audio to normal, press this button once again, or press the work also. PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment. Make sure that there are no obstacles between the remote control and the display’s signal receiver. Left Note The remote control may not function properly if you use a high-frequency fluorescent lamp. To video output To S-video output To S-video input. To RGB output (DVI-D) To DVI-D input To RGB output (mD-sub) To mD-sub input To audio output To audio inputs Display bottom Note. Press The color of the power lamp changes from “Red” to “Green”. Press Select the video mode to input. Press The color of the power lamp changes from “Green” to “Red”. Muting the audio Press The audio is removed. Press again to restore the audio to the original level. The mute mode can also be released by pressing the volume buttons. You can select from VIDEO1 mode to VIDEO4 mode.You can select between the modes from RGB1 to RGB2.Picture Mode Press This button can be used to switch the picture mode.Wide1 (Video) Displays natural-looking pictures of standard size on the wide screen.Signal Contrast (E-21) Drive Contrast. See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-20 for the basic operation procedures. Adjusting the Signal Contrast Press to increase the input signal contrast. Press to reduce the input signal contrast. Even more advanced Sharpness adjustments can be made as required.

• fujitsu 42 wide plasma display manual, fujitsu 42 inch plasma tv manual, fujitsu plasma 42 manual, fujitsu plasma 42 manual pdf, fujitsu plasma 42 manual download, fujitsu plasma 42 manual free, fujitsu plasma 42 manual instructions.

Also, be also sure that your dealer performs the installation. See the appropriate instruction manual for more information on the installation hardware you select. To prevent an accident and ensure safety iWhen you finish, the settings will be automatically stored. Thus, when the display receives that signal,If you have only a 2-hole receptacle, you will need to have it replaced.To return the audio to normal, press this button once again, or press the does the work also. (DISPLAY button) E-16 Press this button to display the input mode, and screen size status. The status is displayed for about five seconds. (PICTURE MODE bTo return the audio to normal, press this button once again, or press the does the work also. (DISPLAY button) E-16 Press this button to display the input mode, and screen size status. The status is displayed for about five seconds. (PICTUPRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to becoIf you experience problems, move the lamp or use the. Be sure to read and observe the safety precautions (see Consult your product dealer for details. Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals. Ferrite cores These ferrite cores are used to attenuate undesired signals. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation. When this happens, be sure to remove the power plug from the receptacle and contact your dealer.The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.

Two ferrite coresLoose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals. Ferrite cores. These ferrite cores are used to attenuate undesired signals. Two ferrite cores. When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal. Power Cable. RS-232C Cable. Ferrite Core. Ferrite CoreEnglishThis lamp shows the state of the power supply.Power OFF (stand-by). Lit (green). Power ON. Lit (orange). Power saving (DPMS: PowerFlashing (red or green): Malfunction (Flashes differentlyReceives signals from the remote control. Warning. If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure toLeaving the display power ON can result in fire or electric shock.PART NAMES AND FUNCTIONS (Continued). BottomThe power is partly supplied.This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. (See P. E-2.). Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. (See P. E-2)English. Description of Input Terminals. RS-232C terminal (RS-232C). Pin No. Input signal. Pin No. Input signalFrame. Ground. SignalBe sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, beSee the appropriate instruction manual for more information on the installation hardware you select. To ensure proper heat radiation, provide at least as much space around the display as shown below. Keep the air vents of the device free from obstruction.Horizontal type. Side.

Adjusting the Black Level Press to strengthen the reproduction of black. (Provides a picture quality with deep blacks.) Press to weaken the reproduction of black. Each time is pressed, the setting is switched.Each time is pressed, the setting is switched. Therefore, you need to select a desired input mode before making any changes. Therefore, you need to select a desired input mode before making any changes. You can make to the standby state automatically when the no signal state continued during set up time. Press to select the amount of time before the standby state starts. Press to store. Each time you press, one of the available choices appears in the following sequence: Press to store. Press The main menu screen will appear. Press DEFAULT”. Each time you press menus appears in the following sequence: PICTURE FACTORY DEFAULT The FACTORY DEFAULT Menu screen will appear. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. No cables are supplie d with the display for connection to exte rnal equipment.The power lamp lights up. 2 Press ? on the remote control. Select the country using the Auto Store f unction in the CHANNEL SETTING menu (see page E-26).Se e BASIC PROCEDURE OF AD JUSTMENT MENU OPERA TIONS on page E-19 for the basic operation procedures. It is switched as shown as below. Be sure not to clean the display using a cl oth dampened with volatile solv ents, such as benzene or thinner. Such solvents can harm the display’ s cabinet, the filter at the screen front, and the remote control. Page. Before Use. Usage. AdjustmentsRefer to these manuals whenever questions or problems about operation arise. Be sure to read and observe theKeep these manuals where the user can access them readily. Consult your product dealer for details.Two AA batteries. Two user’s manuals. One power cable.

If this equipment doesThis unit has been engineered and manufactured to assure your personal safety. ButPlease read these “Important. Safeguards” carefully before use.Install in accordance with the manufacturer’s instructions.A polarized plug has two blades with one wider than the other. AThe wide blade or the third prong are provided for your safety. If theServicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rainDo not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.The product may fall, causing serious injury to a child or adult, and seriousThe product should be mounted according to the manufacturer’s instructions, and should use a mountThese ensure reliable operation of the product and protect it fromIt should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation isFor proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm. If you are not sure of the type of powerThis plug will fit only into a grounded power outlet. If you are unable to insert the plugDo not defeat the safety purpose of the grounded plug.This will prevent damage to the product due to lightning and power line surges.Never spill liquid of any kind on the product. Refer all service to qualified service personnel.Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controlsUnauthorized substitutions may result in fire, electric shock, or other hazards.For example, cloth, paper, matches, aerosol cans or gas lighters that present specialWhen it is used with other power supply voltage, the power cable must be changed. Use the standard power plug and cord set of the specified country. Consult your product dealer. Power cord.

FrontUpperWallThe display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packingReference. See P.E-7 for more information on options.EnglishWarning. To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.Using this display with other option can cause instability resulting in possible injury.The fifth input signal will delete the adjustment value ofThus, when the display receives that signal, pictures will beMain corresponding signals (RGB mode). Display (dots x lines). Horizontal frequency (kHz). Vertical frequency (Hz). SignalDepending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items. All terms (i.e., company and product names) used in this document are trademarks or registered trademarks. Functions may be different or unavailable with some models and some device options.Model. EnglishAspect ratioWeight. Outer dimensionsPower supply. Current rating. Number of pixelsOperating conditions. Humidity:External equipment terminals. RGB1 inputSynchronization signal:TTL level. Constrol terminalRegulation. EMC: FCC Part 15 Class A, ICES-003 Class ASPECIFICATION (Continued). Model. Screen sizeAspect ratioWeight. Number of pixelsSound output. Speaker. Operating conditionsHumidity:External equipment terminals. EMC: FCC Part 15 Class A, ICES-003 Class AEnglishPage. Consult your product dealer for details. E-MDH00771-01(hyo1). Page 1WARNING: This is a Class A product. In a domestic environment this product may cause radio interference inThis equipment generates, usesHowever, there is no guarantee that interference will not occur in a particular installation.

User Color Temp. setupCan set up when User is selected in Color Temp. PressPress. The initial value of User Color Temp.User Color Temp.adjustment screen. You can adjust the display quality to the value you want within the adjustable range.Therefore, you need to select a desired input mode before making anyEach time you press or, one of the availablePressPressAdjusting Screen Position (Position). Horizontal position (Horizontal)Vertical position (Vertical)PressAdjusting Screen Size (Size). Screen width (Width)Screen height (Height)PressYou can adjust the display quality to the value you want within the adjustable range.Each time you press or, one of the availableAdjustment, Function, On Screen Menu, Input. Terminal and Others.PressPressAdjustmentOn Screen Menu: Can make a display setting such as OSD, Language. (See P. E-16.). Input TerminalOthersPC’s processor. If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”. PressPressPictures and the outline of letters may blur or flicker as the clock phase of your PC may be different. If you experience blurring, you can obtain a clearer picture by adjusting the “Clock Phase”. UseAuto:Makes automatic adjustment. Manual: Makes manual adjustment. Press. PressWhen selecting Manual by Clock PhaseNormally, the automatic setting ensures the optimal value. Adjusts the extremely dark or bright pictures. PressReceives a white screen signal and adjusts the dynamic range of images to the optimum.Auto Calibration screen appears.PressYes: Stores the data of Auto Calibration. No: Disables the execution result of Auto Calibration.You can adjust the display quality to the value you want within the adjustable range.Each time you press, one of the available choices appears in the following sequence. On. Off. On: Displays all information. Off: Displays only menus and error messages. PressYou can use this option to select the language displayed on the screen.English. Deutsch (German).

Italiano (Italian)Each time you pressDecoder. RGB-PC: For using RGB for PC. Decoder: For using digital tuner with RGB signal input.Each time you pressOff. Does not mask. Number: Masks the fringe (top, bottom, right and left) of the screen by the number ofDPMS (which stands for “display power management signaling”) allows the display to maintain anThis function causes on-screen information to disappear until the next input operation, if the powerDPMS is active, the power indicator lamp turns orange.DPMS screen appears.Off:Disables DPMS. Number: Approximate time before DPMS starts. (Unit: minutes)PressEach time you press. BlackWhite. Black: Mutes images in Black background. White: Mutes images in White background.You can make adjustments to the value you want within the adjustable range.You can use this option to move the screen position to minimize phosphor-induced “burn-in”. Follow the steps below.Each time you press. Off:Disables Screen Orbiter. Time: Moves the pattern approximately every one hour. Mode: Moves the pattern when the power is turned ON.Each time you pressMin.: Pattern moves in small range. (About 5 pixels). Std.: Pattern moves in moderate range. (About 10 pixels). Max.: Pattern moves in wide range. (About 15 pixels)Using screen protection functions (examples). The screen protection functions minimize phosphor burn-in but cannot completely eliminate it. When using the display occasionally. When using the display continuously. Thus, when the display does not receive a signal, it will automaticallyWhen the predeterminedThis causes the screen saver pattern to move in the same range atYou can make adjustments to the value you want within the adjustable range.When you use two or more displays, you can use a single remote control to control individualEach time you pressYou can normally control displays. When you do not press any of the SHIFT buttons, you can control all displays. PressYou can use this option to switch the setting for RGB input signal.

Power supply voltage:The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, youContact your dealer for more information. To ensure that the display has aThis will ensure the same picture or pattern is not constantly. You may find, however,It may be very hot. You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remoteIn this case, contact your dealerIn this case, you will seeWarning. When this happens, be sure toThen contact your dealer. Information. Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PCRemoteTo RGB1 inputWith a computer. NoteUse this button to display a desired menu for adjusting the picture. Unused. Use these buttons to scroll through options in a menu and change values. Press this button to finalize the selection of a desired menu or option within a menu.When you use two or more displays, you can use these buttons to control up to four displaysCAUTION: Be sure to use replacement batteries of the same type as the original ones. When disposing of used batteries, please comply with governmental regulations or environmental. Note. The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. Do not use rechargeable batteries (Ni-Cd).To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations orBe sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.Make sure that there are no obstacles between the remote control and the display’s signal receiver. Upper. Lower. Left. RightInformation.

The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use theThe power indicator lamp turns red.When you do so, the power indicator lamp turnsThe power indicator lamp turns red. Remember that if you select a mode with an aspect ratio (ratio of frame width to frameFor films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved. ReferenceEach time you press, a different picture modeNormal mode. When you are in an RGB input modeDisplays pictures of normal size (i.e., a 4:3 aspect ratio). Wide. Ideal for displaying vertically extended pictures such as squeezed pictures. Zoom. VerticallyWide. HorizontallyZoom. Enlarges horizontally extended pictures equally in all directions to maintain the aspectBS broadcasting)You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema. Vision size i.e., the sizes used frequently for picture software.The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making anyEach time you press or, one of the availablePressSelect the item withAdjustment Item. Contrast. Lower contrast. Higher contrast. Brightness. Darker screen. Brighter screen. Color. Lighter colors. Darker colors. Tint. More purplish colors. More greenish colors. Sharpness. Softer pictures. Sharper pictures. Can set up the picture mode. Each time you press or, one of the available choices appears in the following sequence. Dynamic: Suitable for watching a normal motion picture.(Standard). Real. Makes a strong contrast picture. Static. Suitable for watching a still picture. PressLuminance can be set. PressPressUse or to specify a desired color temperature. Each time you pressStandard. User. PressMore reddish colors. Standard color temperature. More bluish colors.

Each time you pressFor RGB mode. Auto: The optimum display is obtained automatically for input signals. Others: The optimum resolution setting is fixed for each signal. PressSwitch to the fixed display when the image is not displayedNormally, use this option in Auto mode. You can use this option to specify and display the type of RGB input signal by code number. Each time you pressAuto. Manual. Auto: Automatically displays the input signal to the optimum. Manual: Selects RGB code number. PressSelect the type of signal when the image is not displayed properly. However, note that when the type of signal is selected directly, the signal of other resolutionYou can use this option to display white over the entire screen to minimize phosphor burn-in. Each time you press. OnOff. Off: Does not display white. On: Displays a white screen immediately. PressYou can use this option to display the enhanced contrast, which is most suitable for the use byEach time you press. On: Sets up Exhibition mode. Off: Sets up normal mode. PressYou can use this option to setup the number of fan rotation and the direction of display text of menuEach time you pressNormal: Displays text normally. PressDisplays system operation status. Select “Information” and pressMode. Input mode. Monitor No. Monitor number. Freq. Scan Mode: Frequency scanning. Input Sync. Signal type. Freq. Synchronized signal frequency, polarity. Preset No. RGB code number. Information screen (RGB Input Mode)Each time you press or, one of the availablePressDisplays the message of whether toPressDisplays the message of havingCleaning the Cabinet and Remote Control. Be sure to remove the power plug from the receptacle beforeBe sure not to clean the display using a cloth dampened withSuch solvents canUse a soft cloth for cleaning. If the cabinet or remote control is heavily stained, soak a soft clothUse a soft, dry cloth for final cleaning. Cleaning the Screen. Clean the screen gently with a soft cloth.

The screen surface is fragile. Never attempt to clean it with a hardCleaning the ventilation grille. Remove dust from the ventilation grille in the rear of the main unitProblemActionMake sure to check the vertical frequency of the input signal.The power indicator lamp flashes differently depending on the type of problem.Plasma Television. Adjustments. Others. Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safetyKeep this manual where the user can see it easily. Consult your product dealer for details.We. Fujitsu General (Euro) GmbHManufacturer: Shinjyo Fujitsu General LimitedYamagata JapanType: 42” PLASMA DISPLAYEuropean Standards:By conformance with the standard referenced, the product followsCouncil. Council. Directive. Place of Issue: Germany. Date of Issue: Sep. 1999. Signature. H. Hirosaki, Managing Director. Fujitsu General (Euro) GmbH. Declaration reference. Tel: 0211-50098-0. Fax: 0211-50098-50We. Fax: 0211-50098-50Operation of this equipment in a residential area is likely toThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. TheseThis equipment generates, usesHowever, there is no guarantee that interference will not occur in a particular installation. If this equipment doesReorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.In a domestic environment this product may cause radioThis unit has been engineered and manufactured to assure your personal safety. ButPlease read these “Important. Safeguards” carefully before use. All the safety and operating instructions should be read before the product is operated.

The safety and operating instructions should be retained for future reference. All warnings on the product and in the operating instructions should be adhered to. All operating instructions should be followed. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the product manufacturer as they may cause hazards. Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causesDo not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and seriousThe product should be mounted according to the manufacturer’s instructions, and should use a mountThe product should be mounted to a wall or ceiling only as recommended by the manufacturer. Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it fromIt should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation isEnglish. For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep distance more than 10 cm. This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of powerThis product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plugDo not defeat the safety purpose of the grounded plug. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. PayFor added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug itThis will prevent damage to the product due to lightning and power line surges.

Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electricNever push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts thatNever spill liquid of any kind on the product. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages or other hazards. Refer all service to qualified service personnel. Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:Adjust only those controls that are covered by the.