fujitsu p7010 manual

The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals, or other hazards. Reference the BIOS manual for further information on changing the default boot drive. This will stop the drive and the holder tray will come out of the notebook a short distance. 2. Gently pull the tray out until the disc can easily be removed from the tray. To Watch a Movie on Battery Power: 1. Have an additional full-charged battery or your AC adapter ready for use. Some available CF Cards:. Once it is installed, you should leave it in place unless you want to increase system memory capacity. CHECKING THE MEMORY CAPACITY Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to check that your notebook has recognized the change. This port is effec- tively a very fast communications port. Some digital devices - such as digital cameras - use IEEE 1394 ports for fast transfer of digital files and data. Modifications not expressly authorized by Fujitsu PC Corpora- tion may invalidate the user's right to operate this equipment. Canadian Notice. Intel PROSet Software - The Intel PROSet Software allows for multiple profile setup and supports auto- matic profile switching. The General Settings dialog displays. Enter a profile name in the Profile Name field. 10. Enter the network SSID, in the Network Name (SSID) field. 11. Click Infrastructure or Ad Hoc for the operating mode. If there is an administrator of the network, contact the network administrator for data settings.Confirming connection After you have finished the network setup operations, access the folder whose sharing has been set for other personal computers. Connectivity is accomplished using only client devices in a peer-to-peer fashion. You are advised to consult with your network administrator for additional information.

• fujitsu p7010 manual, fujitsu p7010 manual pdf, fujitsu p7010 manual download, fujitsu p7010 manuals, fujitsu p7010 manual free.

Operations are subject to the following two conditions: Use of this copyright protection tech- Reverse engineering All rights No part of this publi- Fujitsu and the Fujitsu logo are registered trademarks and Life- Book is a trademark of Fujitsu Limited. Intel and Pentium are registered trademarks and Centrino is a trademark of Intel Corporation or its subsidiaries in the United States and other countries. UNPACKING When you receive your LifeBook notebook, unpack it carefully, and compare the parts you have received with the items listed below. The maximum speed is 33600bps at upload.Lithium ion Battery The internal Lithium ion battery can be installed in the battery bay by aligning it with the slides and pushing it into place. The battery can be removed when swapping with a charged battery, or when the computer is to be stored for a long period of time. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys. It is used to control the movement of the pointer to select items on your display panel. The Touchpad is composed of a cursor control, a left and right button, and a scrolling button. Any software that contains audio files will also contain a volume control of its own. If you install an external audio device that has an independent volume control, the. Your LifeBook notebook will automatically detect the new device and activate it within your system. This will open the main menu of the BIOS Setup Utility with the current settings. If you do nothing the system will load the operating system, and then the Windows Welcome will begin. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your oper- ating conditions, such as those for the display bright- ness.

Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecom- munication company cause to request the user to disconnect the equipment from the telephone line. ACPI Advanced Configuration and Power Interface. An industry specification for the efficient handling of power consumption in mobile computers. ACPI determines how a computer's BIOS, operating system, and periph- erals communicate with each other about power management. The equipment which connects a computer or other data terminal to a communication line. Monaural A system using one channel to process sound from all sources. NTSC National TV Standards Commission. The standard for TV broadcast and reception for the USA. Operating System A group of control programs that convert application commands, including driver programs, into the exact. Specifies which network you are joining. In a corpo- rate environment, or when accessing corporate resources, the Domain: may not be your Windows computer name. Refer to “Enrolling a Fingerprint” on page 107 for additional information. Should a password be reset, or an account expire, you can remove stored credentials from OmniPass. Highlight the desired resource under Password Protected Dialog and click Delete Page. The Enrollment interface allows you to enroll finger- prints. For the procedure to enroll and authentication device refer to Chapter 2.3. To enroll additional finger- prints, click Enroll Authentication Device, and authen- ticate with OmniPass. We have 4 Fujitsu Lifebook P7010 manuals available for free PDF download: User Manual, Easy Manual, Bios Manual, Getting Started. F. Page 2 LifeBook P7000 Notebook BIOS. LifeBook P Series Notebook BIOS. Page 3 Main MenuPage 4 LifeBook P7000 Notebook BIOSPage 5 Main Menu. Primary Master Submenu of the Main Menu Note: Actual hard drive label shown may vary. DependingTable 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu. Page 7 Main Menu.

However, you may encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices, that you can solve by replacing the device. The information. Floppy disk is not loaded correctly. Security is set to protect access to floppy disk data. Hard Drive Problems You cannot access your The setup utility is incorrectly hard drive. The primary battery is installed but is faulty. Your notebook appears to BIOS setup changes were not change setup parameters saved when you made them and when you start it. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. BIOS attempts to locate the address and display it on the screen. Fujitsu has used DISE to create an image of everything installed on the computer at the time you purchased it. The image is saved on a separate partition on the hard disk. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one). About Fujitsu Driver Update Displays the FDU version number and copyright information Fujitsu Driver Update Readme Displays the FDU readme. Do not use your Fujitsu LifeBook notebook in a wet environment (near a bathtub, swimming pool). Always use the AC adapter and batteries that are approved for your notebook. Always store your media disc in its case when it is not in use. Always handle discs by the edges and avoid touching the surface. Power Management Conforms to ACPI (Advanced Configuration and Power. FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protec- tion against harmful interference in a residential installa- tion.

Use the calendar foPressing the Enter key selects the Secondary Master submenu MasMiscellaneous When selected, opens the Miscellaneous Configurations submenu, which allows you to change the Configurations power button, Wake Up On LAN, and Volume settings. Event Logging When selected, opens the Event Logging submenu which lets you view and eTo try again, the instructions for Navigating Through the Setup Utility press the Enter key and then retype the to make any changes. password. Set is displayed when the general user pass- word is set, and Clear when it is not. The Supervi- Password sor Password. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn't end up there. Please also check your spam folder. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Dolby is a registered trademark and Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Copyrights 1992-1999 Dolby Laboratories. All rights reserved. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu Computer Systems Corporation. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu Computer Systems Corporation. Operations are subject to the following two conditions: Example: Shutdown the computer? Please read all caution information carefully. Please read all warning information carefully. Check the service kit that came with your notebook for warranty terms and conditions.

Secondary Master Submenu of the Main Menu Note: Actual drive label shown may vary. Depending on the. Page 8 LifeBook P7000 Notebook BIOS. Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu. Page 9 Advanced MenuPage 10 LifeBook P7000 Notebook BIOS. Table 4: Fields, Options and Defaults for the Advanced MenuPage 12 LifeBook P7000 Notebook BIOS. Video Features Submenu of the Advanced Menu. The Video Features Submenu is for setting the. Page 13 Advanced Menu. Internal Device Configurations Submenu of the Advanced Menu. The Internal Device Configurations submenu allows the user to. Page 14 LifeBook P7000 Notebook BIOS. CPU Features Submenu of the Advanced Menu. The CPU Features submenu configures certain features of. Page 15 Advanced Menu. USB Features Submenu of the Advanced Menu. The USB Features submenu configures the USB capabilities of the. Page 16 LifeBook P7000 Notebook BIOS. Miscellaneous Configurations Submenu of the Advanced Menu. Page 17 Advanced Menu. Event Logging Submenu of the Advanced Menu. The Event Logging submenu is for setting up the logs. Page 18 LifeBook P7000 Notebook BIOSPage 19 Security Menu. Table 12: Fields, Options and Defaults for the Security MenuHard Disk Security Submenu of the Security Menu. The Hard Disk Security submenu is for. Page 21 Security Menu. Owner Information Submenu of the Security Menu. The Owner Information submenu is for setting owner information.Page 23 Boot Menu. Boot Device Priority Submenu of the Boot Menu. The Boot Device Priority submenu is for setting the. Page 24 LifeBook P7000 Notebook BIOSPage 25 Exit MenuPage 26 LifeBook P7000 Notebook BIOS. Table 18: Fields, Options and Defaults for the Exit Menu. Navigating through the Setup Utility to make any changes. System Time and System Date can also be set from your operating system without The following tables show the names of the menu fields using the setup utility.

(Figure 2-14) This is particularly useful when you are navigating through on-line pages. To use the Scrolling button, press the crescent shape at the top or bottom of the button to scroll up or down a page. When you have reached the desired section of the page, release the button. (Figure 2-15) If you install an external audio device that has an independent volume control, the hardware volume control and the software volume control will interact with each other. It should be noted that if you set your software volume to Off, you will override external volume control settings. Cold-swapping means swapping devices while your LifeBook notebook is powered off. Hot-swapping occurs when your system is powered on with a charged main battery or AC Adapter. If left empty, dust or foreign matter may accumulate inside the notebook. Pull out the Flexible Bay device from the slot. If the fit is incorrect, you may damage the bay or the device. If the device does not move easily in the bay, remove it, and check for dirt or foreign objects. It will require a firm push to latch the device in place. The drive letters associated with the device will be created and listed under My Computer and Windows Explorer. This will push your device out slightly, allowing you to remove the device. This will require light force. If the fit is incorrect, you may damage the bay or the device. It will require a firm push to latch the device in place. The drive letters associated with the device will be created and listed under My Computer and Windows Explorer. There are two ways to adjust the brightness, by using the keyboard or the power management utility. This will open the BatteryAid Properties dialog box. For maximum battery life, make sure that the brightness is set as low as possible.

When you are done working you can either leave your LifeBook notebook in Suspend mode, (See Suspend Mode on page 27 for more information), or you can turn When your LifeBook notebook is first turned on, the main system memory is empty, and it needs to find instructions to start up your notebook. This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a standard boot sequence including a Power On Self Test (POST). When the boot sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating system’s opening screen. Example: When you install a new application. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS’ environment to operate your notebook. This will open the main menu of the BIOS Setup Utility with the current settings displayed. Select LifeBook BIOS Guides from the pull-down menu for your LifeBook series. If you are unsure of your notebook’s BIOS number, refer to your packing slip. If you do nothing the system will load the operating system, and then the Windows Welcome will begin. Windows has three parts: You may restart this process at any time in the future, but you must complete it in order to use your computer. You will be asked for such items as the language you wish to use, the country in which you live, your first and last name, and about how you dial out from where you will be using your LifeBook notebook. For the modem settings, enter your current location information where you will be using your LifeBook notebook. If you are not connected to a phone line and plan to register at a later time, you may click the Skip button, and you will go directly to the condition of use page.

Note that this switch is present on all models of the LifeBook P7000 notebook, but it is functional only on those with an optional Wireless LAN installed. If neither device is installed, the weight saver should be installed. (See Flexible Bay Devices on page 18 for more information) Consult your PBX manufacturer’s documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem. The maximum speed is 33600bps at upload. The battery can be removed when swapping with a charged battery, or when the computer is to be stored for a long period of time. (See Lithium ion Battery on page 31 for more information) In addition, the configuration portion of the label has the serial number and manufacturer information that you will need to give your support representative. It identifies the exact version of various components of your notebook. These symbols (when visible) tell you how each of those components is operating. (Figure 2-8). When you turn off the system, all indicators will go off, except when the battery is being charged. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys. (Figure 2-9) Turning off the NumLk feature is done the same way. The keys in the numeric keypad are marked on the front edge of the key to indicate their secondary functions. The Start key displays the Start menu. This button functions the same as your onscreen Start menu button. The In programs such as Windows Explorer, it moves the “focus” (selects the next item up, down, left, or right). (Figure 2-9) The functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used. When it is enabled, displays with Each time you press the combination of keys you will step to the next choice.

The choices, in order, are: built-in display panel only, both built-in display panel and external monitor or external monitor only. It is used to control the movement of the pointer to select items on your display panel. The Touchpad is composed of a cursor control, a left and right button, and a scrolling button. The cursor control works the same way a mouse does, and moves the cursor around the display. It only requires light pressure with the tip of your finger. The left and right buttons function the same as mouse buttons. The actual functionality of the buttons may vary depending on the application that is being used. The scrolling button allows you to navigate quickly through pages, without having to use the scroll bars. (Figure 2-15) For information on using the optional fingerprint sensor, refer to “Fingerprint Sensor Device” on page 105. To leftclick, move the cursor to the item you wish to select, press the left button once, and then immediately release it. To right-click, move the mouse cursor to the item you wish to select, press the right button once, and then immediately release it. You also have the option to perform the clicking operation by tapping lightly on the Touchpad once. (Figure 2-12) This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press the left button twice, and then immediately release it. You also have the option to perform the double-click operation by tapping lightly on the Touchpad twice. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it. Dragging can also be done using the Touchpad. First, tap the Touchpad twice over the item you wish to move making sure to leave your finger on the pad after the final tap. Next, move the object to its new location by moving your finger across the Touchpad, and then release your finger.

If the call is unsuccessful, you will be returned to the phone settings page where you may try to fix them. If you are unable to fix the settings please contact Fujitsu Service and Support. (See Fujitsu Contact Information on page 1 for more information). If you would simply like to move on, and register at a later time, you may click the Skip button, and you will go directly to the Condition of Use page. Enter the requested information, then check the box at the bottom to register your copy of Windows with Microsoft. Once you have finished, click the Next button to continue. Read the agreement carefully. When you finish reading you must accept or reject the If you stop the process your notebook will return to the beginning of the Windows Welcome Process, even if you shut your notebook down and start it up again. When you click the Click Me.These icons provide links to utilities that you will frequently access. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness. Internal power management for your notebook may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility. As with all mobile, battery powered computers, there is a trade-off between performance and power savings. Push the button when your notebook is active, but not actively accessing anything, and immediately release the button. You will hear two short beeps and your system will enter Suspend mode. (See figure 2-3 on page 6 for location). You can tell whether or not your system is in Suspend mode by looking at the Power indicator. (See figure 2-3 on page 6) If the indicator is visible and not flashing, your notebook is fully operational. If the indicator is both visible and flashing, your notebook is in Suspend mode.

If the indicator is not visible at all, the power is off or your notebook is in Hibernation mode. This mode will turn off the CPU, the display, the hard drive, and all of the other internal components except those necessary to maintain system memory and allow for restarting. Your notebook can be put in Suspend mode by: Double-click the Power Options icon and select the Advanced tab. When you resume operation from Suspend mode, your notebook will return to the point where it left off.The resume function of the button cannot be disabled. The files are left open and memory is kept active during Suspend mode or the memory is transferred to the internal hard drive during Hibernation mode. Check your PC Card documentation for more information. To enable or disable the Hibernation feature follow these easy steps: Select the box to enable or disable this feature. Select Hibernate from the pull down menu for Power buttons. This feature saves power by turning off the display if there is no keyboard or pointer activity for the user selected timeout period. Any keyboard or pointer activity will cause the display to restart automatically.This feature saves power by turning off the hard drive if there is no hard drive activity for the user selected timeout period. Any attempt to access the hard drive will cause it to restart automatically.For example, you can use the Power Management to set the timeout values for turning off the display and hard disks whether you are running the notebook on battery power or one of the adapters. The settings may also be changed in the BIOS. Your notebook will shut down and then reboot. To ensure that your notebook shuts down without error, use the If files are open when you turn the power off, you will lose any changes that have not been saved, and may cause disk errors. The proper sequence is. P Series. BIOS Guide. LifeBook P Series Model.

Document Part Number: FPC58-1149-01LifeBook P Series Notebook BIOSYour BIOS isThe BIOS Setup Utility configures:Entering the BIOS Setup Utility. To enter the BIOS Setup Utility do the following:BIOS Setup Utility with the current settingsNavigating through the Setup Utility. The BIOS setup utility consists of six menus: Main. Advanced, Security, Boot, Info and Exit. This documentThe following procedures allow you to navigate the setupYou will beConfiguration Change or System Failure. If there has been a change in system configuration thatBIOS memory, or there is a failure in the system, the. Power On Self Test (POST). If the failure is not severe, itError message - please run SETUPIf your settings require it, you may beWarning! Error messageMain MenuNavigating through the Setup Utility to make anySystem Time and System Date can also beUse the calendarPanel. The following tables show the names of the menu fieldsMain. Advanced. PhoenixBIOS Setup Utility. Security. Boot. Info. Exit. Item Specific Help. System Time. System Date. Primary Master. Secondary Master. Language. Select Item. Select Menu. Enter Select Sub-Menu. F1 Help. ESC Exit. Adjust calendar clock.F9 Setup Defaults. F10 Save and Exit. Figure 1. Main Menu. Menu Field. Options. Default. Description. Sets and displays the current time. Time is in a 24 hour format ofExample: 16:45:57. You may change each segment of the time. Sets and displays the current date.Move between theOptions. Selects Primary. Master submenuSecondary. Master. Selects. Secondary. Master submenuLanguage. Selects the display language for the BIOS. Main Menu. Primary Master Submenu of the Main Menu. The Primary Master submenu identifies which ATAMain. Note: Actual hard drive label shown may vary. DependingPhoenixBIOS Setup Utility. Power. LBA FormatType. Total Sectors. Maximum Capacity. Multi-Sector Transfers. LBA Mode Control. Transfer Mode. Ultra DMA Mode. The BIOS auto-types theYou enter parameters ofThe drive is disabled. Enter.

Select Sub-Menu. ESC ExitSave and Exit. Figure 2. Primary Master Submenu. Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu. Type:Auto. NoneDefault. Select Auto to have the typeIf None is selected, allSelect CD-ROM if a. CD-ROM drive is installed at this connection. If Hard Disk isSectors for the drive. LBA Format. Logical Block Addressing (LBA). Total. Sectors:Maximum. Capacity:Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu. CHS Format. Cylinders:A numberHeads:A numberSectors:A numberMaximum. Capacity:Display only. Displays the maximum capacity of the drive calculated from theMulti-Sector. Transfers:DisabledThis option cannot be changed when Auto is selected. Specify theDisabled. Enabled. Enables or disables logical Block Addressing in place of Cylinder. Head, Sector addressing. This option cannot be changed when AutoStandard. Fast PIO 1. Fast PIO 2. Fast PIO 3. Fast PIO 4. MultiwordThis option cannot beDisabled. Mode 0. Mode 1. Mode 2. Mode 3. Mode 4. Mode 5. Autotype theThis option cannot beLBA Mode. Control:Transfer. Mode:Ultra DMA. Mode:Main Menu. Secondary Master Submenu of the Main Menu. The Secondary Master submenu identifies which ATAMain. Note: Actual drive label shown may vary. Depending on thePhoenixBIOS Setup Utility. Type:Multi-Sector Transfers. Figure 3. Secondary Master Submenu. Type. Select Auto to have the typeDisk is selected, you must specify the number of Cylinders. Heads, and Sectors for the drive. Select CD-ROM to selectCylinders:This item appears only when the type is identified as Hard Disk. When Hard Disk is selected, you can change the value. This field. Heads:This item appears only when the type is identified as Auto or. Hard Disk. When Hard Disk is selected, you can change theAuto. None. Hard DiskTable 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu. Sectors:This item appears only when the type is identified as Auto or. Hard Disk.

When Hard Disk is selected, you can change the. Maximum. Capacity. Transfers. This option cannot be changed when Auto is selected. SpecifyLBA Mode. Control. This option cannot be changed when. Auto is selected. Transfer. Mode. Standard. Multiword DMA 1. Multiword DMA 2This option cannot be changed when Auto is selected. Multi-word DMA isUltra DMA. Disabled. Mode 5This option cannot be changed when Auto is selected. DisabledExiting from Main Menu. When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to. If you wish to move to another menu, use the cursor keys.Main. Follow the instructions for Navigating Through the. Setup Utility to make any changes. The following tables show the names of the menu fieldsPhoenixBIOS Setup Utility. Video Features. Internal Device Configurations. CPU Features. USB Features. Miscellaneous Configurations. Event Logging. Configures keyboard. F9 Setup Defaults. Figure 4. Advanced Menu. Table 4: Fields, Options and Defaults for the Advanced Menu. Mouse Features. When selected, opens the Video Features submenu, which allows setting of the display parameters,Internal Device. Configurations. When selected, opens the Internal Device Configurations submenu, which allows enabling or disabling the IDE, LAN, and modem controllers. When selected, opens the CPU Features submenu, which allows configuration of CPU performanceTable 4: Fields, Options and Defaults for the Advanced Menu. When selected, opens the USB Features submenu, which allows enabling or disabling USB and SCSI. Subclass support. Miscellaneous. When selected, opens the Miscellaneous Configurations submenu, which allows you to change theEvent Logging. When selected, opens the Event Logging submenu which lets you view and enable the event log.PhoenixBIOS Setup Utility. Power Savings. Numlock. Select power-on stateF9 Setup Defaults. Sets the NumLock function state when the computerVideo Features Submenu of the Advanced Menu.